Wondering if the top coat of a colour kit is the same as top coat of clear neck kit?
Wondering if the top coat of a colour kit is the same as top coat of clear neck kit?
Tony
Hey Tony, better wait for DB to confirm but I got a feeling the neck coat dries a bit harder. The stains are compatible on both of course
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Might be too late - a quick experiment on a maple offcut and then impatience and its on the neck.
Tony
Body top coat will be fine for the neck.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Neck final coat is harder, but you can get away with the body final coat.. It might wear off a bit faster though.
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
I've put one coat on, if I got some clear neck finish to continue are they compatible?
Tony
Sure are Tony
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Posting Permissions
Reply With Quote
