Not sure if this is plausible, but Burst kits of Dingo Tone?
Desert Pea (Cherry)
Nullarbor Sand
Pilbara Dusk
probably already thought of.
Not sure if this is plausible, but Burst kits of Dingo Tone?
Desert Pea (Cherry)
Nullarbor Sand
Pilbara Dusk
probably already thought of.
Regards,
Neil
Hi Neil, I'm sure DB could make up a burst kit of your choice for you, flick him an email or he may see this thread
so you want cherry red and nullabor ochre (brown) ? Karijini red is pretty close to a cherry red
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
yeah I know which colours I want to use. I will be using Black Stump, Karijini Red and Coolangatta Gold
I just thought I'd suggest the idea of pre-made kits is all.
Regards,
Neil
Burst kits are doable.
I can make them up to order. Must get Adam to add them as an option in the store
I haven't made them available as kits due to the endless combo possibilities...
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
because I am sure I'll have way too much top coat left over
Regards,
Neil
Excellent..Originally Posted by dingobass
Burst kits are doable.
I can make them up to order. Must get Adam to add them as an option in the store
and that is a fair comment, I will contact you about one for me.
Last edited by Crusader; 12-11-2015 at 09:24 AM.
Regards,
Neil
yeah if you get one top coat then the burst kit should be a bit cheaper than 2 single kits
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
At the risk of hijacking someone else's thread, what products would I need to emulate this Maton BB1200 Josh Homme effect?
It's a satin finish, but leaning more towards matt.
Posting Permissions
Reply With Quote
