Why pay $300 plus for a binding jig when you can make one yourself?
Sure, it ain't pretty but it will do the job
Why pay $300 plus for a binding jig when you can make one yourself?
Sure, it ain't pretty but it will do the job
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
nice one DB, so the idea is to feed the body into the router and rotate the body ? Is there enough clearance to do the binding channel around cutaways and hard to get places ?
Why do you need so much height adjustment with your nicely cut slots in the RHS beam ? I assume you drop the router down so it sits at the body height ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yes, you feed the body around and there is enough clearance for cutaways..
The extra height is for working on Acoustic Guitars.
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
no worries DB I thought that was the case for higher body axes/bass's.
Nice one, must have been hard work cutting the height adjustment slots, is that RHS about 2-3mm thick ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
aahhh, i see it, cool and simple, thanks
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Was easy as, Woks.
Drill holes either end and attack with angle grinder!
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Sometimes simple just works. Nice tool DB.
ah of course DB, the old angle grinder removes steel real quick !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
And it saves me some difficult work. 👍
Regards,
Neil
And here we have Crusaders LP getting the treatment
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Posting Permissions
Reply With Quote
