Perhaps another silly question...
I've designed a bolt on neck bass guitar. The body is marine hardwood ply and the neck is some random hardwood I found in the factory
Is there any special mounting requirements to attach the two or can I just use good quality wood screws? There's about 18mm of meat on both the body and neck.
Should I add epoxy / wood glue as well to be safe? It will probably never be removed.
Bry
If you have no intention of removing the neck, I would glue it in.
Titebond is the best stuff to use in this instance.
Are you going Fretless on this?
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Nah I'm putting frets on it
haha Bry you just lost a bit of respect from DB, he hates speed bumps !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote
