Hello, what would happen if i dingo toned my guitar, then put on a spray acrylic on top to make it a gloss finish?
Hello, what would happen if i dingo toned my guitar, then put on a spray acrylic on top to make it a gloss finish?
Last edited by Aidan7250; 04-05-2015 at 02:53 PM.
Sick Lad
Hi Aiden,
I asked the same question to Dingobass (he created Dingotone) and it is currently untested. Maybe get a scrap bit of wood and test it?
Try the Dingotone top coats, they can harden as much as Acrylic can if you let it cure, even though the time to finish will take longer as it is completely natural.
Hi Aidan, best wait for Dingobass to answer this, there might be a clash but not sure as I've never tried this combination.
Most likely DB will just send you to the naughty room for asking the question haha.
As Keloooe suggested maybe apply couple of coats of Dingotone on scrap wood and see how the acrylic clear goes over it
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Alright, thank you guys! well, naughty corner for me, yeah its just an idea, it doesn't matter if it doesn't work out, and thanks for the suggestion keloooe. the community is great over here! best one yet.
Sick Lad
No worries Aidan, hope the build goes well! What are you planning? You should start a build diary under the "My Build Diary" subforum so we can all keep up with the build and provide further help!
no worries Aidan, the forum is here to help out any questions you have.
Nice Angus Young avatar !
As Keloooe suggested start a build diary and ask any questions you have
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I will consider that!, i ordered a EX-1 with a bondi blue dingo tone stain, and planing to add a maple headstock veneer!
Last edited by Aidan7250; 04-05-2015 at 03:08 PM.
Sick Lad
sounds like a good plan Aidan, look forward to the build diary.
Keep an eye out for the Australia Post van with any luck later this week or early next week
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Mate i will!!, i did order it last week and it was posted Wednesday, so tomorrow looks like the day
Sick Lad
nice one Aidan, hopefully it does turn up Tuesday.
In the meantime look for some scrap wood to apply the bondi blue stain then try spray acrylic over.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote![[url=https://www.facebook.com/kellysgutiars]](image.php?s=07fcd5359e0ebf1585c148b92c5d2001&u=1285&type=sigpic&dateline=1444110346)
