hi there, my Tele kit arrived today. Will this neck need a truss?
hi there, my Tele kit arrived today. Will this neck need a truss?
Welcome to the forum!
There should be a truss rod installed, look in the hole at base of headstock next to the nut. You should see the hex socket of the rod.
Any adjustment required will depend on current relief of the neck. There is a good write up on this in the how to build your pitbull guitar section.
Last edited by andrewdosborne; 12-12-2014 at 07:52 AM.
Current Projects
#Planning 5 String Bass
Welcome Tim - as above - the kits should come with everything you need, including a lead. It's now up to you to shape the headstock, finish the guitar (stain / paint, etc), wire it up and clean it up (intonate, etc). Tele's are a great place to start - after all - Adam who runs the show here is also known as the Tele napper due to his preoccupation with all things tele.
Check out Gavin1393's how to build your guitar here http://www.buildyourownguitar.com.au...ead.php?t=1895
Start a build diary here: http://www.buildyourownguitar.com.au...newthread&f=56 and ask any questions you want. We love to see photos - even those of us who aren't building at the moment can live vicariously through providing advice and support for others that are still busily building.
Last edited by Brendan; 12-12-2014 at 08:28 AM.
welcome Tim, tele's are a great kit to start with, as Andrew and Brendan said above the kit is complete. The kit comes with an allen key to adjust the truss rod but do some research or ask questions before you make adjustments.
What model tele kit is it ? there's about 6 models.
Start a build diary and let us know your plans regarding stains/paint colours, any hardware upgrades etc. There is a heap of knowledge and experience on the forum so ask any questions you may have.
Take your time and enjoy the ride
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Welcome Tim. Enjoy your build.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck