Page 1 of 8 1 2 3 ... LastLast
Results 1 to 10 of 74

Thread: Chrome Body

  1. #1
    Hi all.Looking at starting these kits and need some advice.I will be fully chroming the body (dont ask how lol,special technique lol )and im am wondering the following.In your opinion which would look better.The most popular i will pick.Now picture the ST body fully chromed with the black pearl pick guard and gold fittings.Or chrome with black pearl and black fittings,chrome with red pearl and gold fittings or chrome with red pearl and black fittings.Which do you think would look best.Need to know before i order,but that will be a week away so off you go.Cheers all!

  2. #2
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    Cool. Chrome is rad. Personally I think mixing chrome and gold would look gaudy as hell. Then again, if you are chrome plating a guitar is gaudy something you're worried about?
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  3. #3
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    5 litre Calais - Love the idea - personally though I'm a simple bloke - so think if you're going chrome - aim for look of the guitar above - as such would be chasing down a chrome pickguard (gold or silver)...

  4. #4
    I do like the "Satch" chrome look - I did try to do this once and I used a Chrome spray pack..... looked good until I tried to do some clear over it and then it turned grey !! YUCK !!!..... I think the Chrome and black would be the right combo.

  5. #5
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    I'm building a chrome ST-1 kit Calais and hoping I won't have Trevor's problem when I clear it !
    Think you would have to chrome plate it to get the look of the Satch axe pic.
    I personally think black pickguard and hardware would be the way to go. I'm using a silver mirror pickguard and chrome hardware to keep the theme
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  6. #6
    Y your using chrome paint and wish to clear ir you need to use a special paint or it will just peel off and yeah will turn grey.But im thinking the chrome and black too as the chrome will be the main focus and gold might just make it clash.but still thinking.

  7. #7
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    any idea what sort of clear coat you need to go over chrome paint Calais? I'll do some research
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  8. #8
    the one i get actually comes with the chemicals i use so not quite sure,but any decent paint shop should know.All i do know is its a 2k product.I will find the chemical compound and maybe a paint shop might no straight away.

  9. #9
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    ok thanks Calais if you can please share any information you find out. I'm glad I didn't put a clear coat on and find out the hard way the colour goes grey !
    what model is your Calais ? presuming earlier than VT being a 308
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  10. #10
    ok.the chemicam properties are as such,topcoat.... Xylene,n-butyl acetate and resin and the hardener contains nebutyl acetate,2-methylpropan-1-ol and resin.Hope that can help.cheers.

Page 1 of 8 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •