Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: Andrews spalty demo

  1. #1
    Hey guys. Here is a demo of my spalty lp I just finished. Sorry about the bung notes. As everyone knows, your as good as vai til you start recording.

    http://youtu.be/WhTEaGKfzIU

  2. #2
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    well done Andrew, sounds awesome, great range of sounds you played. Are these Epiphone pups ? Maybe the earlier parts of the vid the camera was too high and couldn't see what you were playing.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #3
    Probably was mate, just had my phone resting against a speaker on my desk. Next time ill get the boss on camera duties. Epi pups all round. Dont know what model or anything, just that they came out of my lp when I put a jb, 59 in it.

  4. #4
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    yer ok cool, well you got a good sound anyway, looks like you have at least 8 - 10 effects pedals. Makes a huge difference to mike up the amp and sync it with the video pictures. Is that easy to do ? I got cubase
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #5
    Turns out it isn't. The sound, I just realised, is half phone Mic and half 57 hence the buzzy sound. I'll 're upload a proper vid later tonight with the sound fixed. As for lining it up, not hard at all, just a bit fiddly.

  6. #6
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    what software are you using Andrew to mix the miked sound into the video, is that possible with cubase ?
    I'm plugging the guitar directly into cubase so the amp isn't miked up
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  7. #7
    Can't remember the name but if you Google how to edit a video for YouTube the first result of a YouTube vid is the program I Got, free trial and the link is in the description. I hit record on the camera, then record on cubase, did my thing then exported the cubase audio and put it in the video software as an audio track. Dropped in the vid track, lined it all up and exported as an mp4. If you click on a track the audio properties pop up so you can mute the audio from the camera and only have the cubase audio or blend the two together.

  8. #8
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    ok cool thanks Andrew, might look into it, my 4D mate Dennis probably knows how to merge the audio and video.
    I'll keep videoing with the gopro gives a pretty good sound.
    I've ordered a gopro clip on mount that will be able to clip to the headstock and record straight down the neck, should arrive next week I'll post a demo sometime. Ordered it I'm playing the national anthem for an intro to opening ceremony for the state BMX titles Saturday week
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  9. #9
    That's unreal man! Congrats. You gotta post that vid, I wanna see it hey.

  10. #10
    Overlord of Music gavinturner's Avatar
    Join Date
    May 2013
    Location
    HOLGATE NSW
    Posts
    3,057
    Great work Andrew. She sounds amazing, and that's killer playing. Awesome.

    Cheers,
    Gav.
    --
    Build #01: BC-1
    Build #02: ST-1
    Build #03: JR-1DC
    Build #04: ES-2V
    Build #05: ESB-4 (GOTM July 2014)
    Build #06: RC-1
    Build #07: MK-2
    Build #08: TLA-1
    Build #09: JR-1DC
    Build #0A: LPA-1
    Build #0B: STA-1 (GOTM April 2015)
    Build #0C: MKA-2
    Build #0D: LP-1M
    Build #0E: JB-1
    Build #0F: FS-1

    Find me:
    https://www.facebook.com/firescreek.guitars/
    http://www.guitarkitbuilder.blogspot.com.au/

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •