STA-1 Ash Body Strat - Neck Pocket Dimension

[hidden_dog]

Hi,

Does anyone know the neck pocket dimension for the STA-1 Ash strat?

I was thinking of getting just the kit minus hardware so I can use it as a substitute body for my standard strat.

Thanks.

[wokkaboy]

Hi Hidden Dog,
what dimension are you after, the longest length (to centre of pocket) and the width ?
I've got 3 of these kits built but I'd have to remove the neck to get the length measurement.
Dimensions should be the same as a standard ST-1 kit, I have one of them half built, I can post the dimensions tonight if you like ?

[hidden_dog]

Hi Wokkaboy,

Thanks I'm after the width length and depth of the neck pocket cavity as I was thinking of refitting my standard fender neck to the ash body and have it painted as a tobacco burst.

[hidden_dog]

I'll compare the dimension you have with my fender neck to see if it fits and if I should get the kit.

[wokkaboy]

Hi Hidden Dog,
sorry it took a while, the pocket of the ST-1 is 73mm long to centre of pocket and 56mm wide, should be the same as the ash model
Hope your neck fits !

[hidden_dog]

Thanks Wokkaboy, I'll check

[Brendan]

Flick an email to Dingobass@pitbullguitars.com - he's working on a STA-1 at the moment (http://www.pitbullguitars.com/commun...3#postid-20619).