Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Potentiometer differences?

  1. #1
    Just noticed that the pots supplied with my ES-1GT kit differ from each other...
    and as I'm a little "challenged" when it comes to the electronic side of things, wondered if someone could help out.
    2 pots are marked "A500K", while the other 2 are "B500K".
    Which 2 are used as volume pots and which for tone pots? ...assuming there is a difference.

    Thanks

  2. #2
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    Hi Andy.
    The "a" are the volume
    And the "b" are tone.

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  3. #3
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    And, they wont measure anywhere near 500 k .....as they can be as much as 20% out and still retain the 500k label!
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

  4. #4
    Thanks db.....beautiful looking dingo by the way, you must be a very proud daddy!!

  5. #5
    Mentor kells80aus's Avatar
    Join Date
    Jan 2014
    Location
    Wyndham Vale, Vic
    Posts
    775
    A's pots are Log pots meaning the level of resistance changes as you turn the shaft by a factor of ten.
    B's are Linear meaning the that the rate of resistance change as you turn the shaft is constant meaning each segmant is the same as the last.

    http://en.wikipedia.org/wiki/Guitar_wiring

    Cheers PK
    Kellza
    (PK)
    "Jack of all trades, Master of None"
    "You'll never ever know if you don't have a go"

    https://www.facebook.com/PaulWKelly

    Avatar Image is a "The headstock of my first scratchy"

  6. #6
    Member peterh's Avatar
    Join Date
    Jan 2016
    Location
    Peterborough, ON. Canada
    Posts
    133
    I know this is an old thread, but it relates to some searching I did while looking at electronics upgrades. I noticed the PBG description of the mini Bourns audio pots says the A's are used for both volume and tone (PBG doesn't sell B's from what I can see). Is there a noticeable different between log (A) and linear (B) pots for tone?

  7. #7
    Banned
    Join Date
    Dec 2015
    Posts
    1,171
    There is no difference in tone of pots A and B , only in the taper. at 10 both will be 100%, at 0 they will both be 0%. at 5 the linear will be at 50% and the audio will be less, audio rolls off faster.

  8. #8
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Peter - I think that most people will struggle to hear the difference. As Tony has said, at 0 / 100% both are the same. A taper however, is apparently more aligned with how we hear things - at 50% we hear it as 50% when it's technically not. Many builders just use A tapers, hence only stocking the log types.

  9. #9
    Member peterh's Avatar
    Join Date
    Jan 2016
    Location
    Peterborough, ON. Canada
    Posts
    133
    Thanks for clearing that up, guys! Got Adam to add some new A pots to my order.

  10. #10
    Moderator Brendan's Avatar
    Join Date
    Apr 2013
    Location
    Perth, WA
    Posts
    3,444
    Great idea - cheapest form of upgrade that there is!

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •