Wire Diagram

[Nick Savanah]

Hi every one I am Nick,

I am doing a ST-1 and need a wire diagram, I am looking for a wire diagram for a humbucker in the bridge position and two single coil middle and neck for a ST-1, I would like to use a coil split with a push pull pot to make the humbucker single coil or as usual twin coil, can you please give me some options.



Mant thanks

Nick.

[Brendan]

Try this one:
http://deaf-eddie.net/tdpri-drawings/hss-cs-series.jpg
Alternatively do a search for HSS wiring diagrams and look for the bits and pieces you are looking for - there's heaps out there .

[Brendan]

'Nuther one:
http://www.seymourduncan.com/support...2s_1v_2t_5w_pp


PS - welcome along Nick... Hope the ST-1's great for you..

[WeirdBits]

Hi Nick, welcome to the forum.

There are a few options available, depending on which pickups and pots you are using. Here's three variations:
Seymour Duncan HSS, 1 Vol, 2 Tone, 5 way, Push Pull
Guitar Electronics.com HSS with auto coil split
DiMarzio HSS, push pull split bridge

Hope that helps.

(Ah Brendan, you type too fast)

[stan]

Welcome Nick, can recommend the seymour duncan site

[Tim]

Welcome to the PBG clan Nick

[gavinturner]

Welcome Nick! Sounds like a sweet project. Keep us up to date with your progress!

Cheers,
Gavin.