Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 32

Thread: robs ST-1 (Lyn #4)

  1. #1
    Mentor robin's Avatar
    Join Date
    Feb 2013
    Location
    Brisbane
    Posts
    1,513
    Hey Guys and Gals,

    I was a bit slack with progress updates on this one, so not so much a build diary as, ta-dah, its finished.

    Yes its another ST-1. I dub thee Lyn #4, for the sole reason it is my 4th build. This time in a Jarrah stain, finished in (apologies in advance) Tru-Oil. (I know, I know, just point me in the direction of the Naughty Corner.) I also went with a vintage look to the neck and headstock also in T-O.

    I thought I would lavish a bit of love on this one, so she got a few upgrades. Firstly a set of Tonerider P'ups, the "7 sound" wiring mod, and the treble bleed "fidelity mod" courtesy of Phil (Dingobass) and lastly a black scratch plate.

    I also got some black P'up covers and control knobs to match the black scratch plate but the holes in the covers didn't line up with the Tonerider's pole pieces, so I had to stick with white covers. Not my first preference but it is slowly growing on me. Sort of like warts I suppose.

    I have ordered some more black covers, I'll see how I feel when they arrive. But as I'm not too fussed with appearances she will probably stay as is, and I'll use the black covers on an upcoming project I'm planning for one of the youth at church.

    Anyhoo a Post is no good without photos, so here she is:

    Cheers
    rob



  2. #2
    Mentor robin's Avatar
    Join Date
    Feb 2013
    Location
    Brisbane
    Posts
    1,513
    And a couple more:



  3. #3
    She's a beauty. I like the white pups. I think it would look too dark with black pups. That jarrah really pops, well done.

  4. #4
    Wow Rob...that finish looks impeccable.
    I also think the white pups look fine, especially with the white knobs and switch.
    Well done.

  5. #5
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    looks awesome well done Robin, got to be happy with the finish, I am thinking of tru oiling my camphor scratch body, I really love the level of gloss you are getting on these builds. I might join you in the naughty corner for saying that !
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  6. #6
    A beautiful finish, as always, Rob. That Tru-Oil really does shine. What do you think of the Toneriders?

    With all the interest in Tru-Oil that you've stirred up... maybe Gav should add a Wudtone vs Tru-Oil to his N!$&@ vs Wudtone sound comparison (although I doubt DB would ever forgive him if he stripped Wudtone off an axe to put TO on it).


    Scott.

  7. #7
    Wow. That's pretty. Dan's right, the white bits were absolutely the right choice.

  8. #8
    Overlord of Music
    Join Date
    Aug 2012
    Location
    Brisvegas
    Posts
    3,356
    Once again Rob, you've knocked it out of the park. A very attractive guitar.
    'As long as there's, you know, sex and drugs, I can do without the rock and roll.'

  9. #9
    yes the tru-oil finish ,, my preferred of finishes ,, so easy to put on and get a good gloss ,, looks great , and yes weirdbits i think that should be in the test !!!

  10. #10
    Mentor robin's Avatar
    Join Date
    Feb 2013
    Location
    Brisbane
    Posts
    1,513
    Thanks so much guys for all your comments and encouragement. Those that know the back story of these builds will know how special each one of these guitars is to me and each one is a labour of love.

    So it looks like I'll be keeping the white accessories. Thanks guys for the feedback.

    @ Woks,
    be careful mate, you don't want to spend too much time in the Naughty Corner, you'll get a bad reputation.

    @ Scott,
    I am probably not the right person to ask about pups. I've never owned a Fender so not that experienced. But the difference between PBG pups and Toneriders was not as marked as I was anticipating.

    Output of all three Toneriders was marginally greater than the PBG's with the biggest difference being the bridge pup which was noticeably louder. The Toneriders were definitely brighter but that may have something to do with the crisp new strings.

    Build quality was definitely far superior with the TR's which would probably indicate a more consistent product where as with the PBG's it might be a bit more hit and miss. I might have been lucky with the PBG's that are in my original ST-1.

    I will be putting some In the future project I mentioned above for one of the Church youth. I used the City Limits in mine, might go for Vintage Blues next time and then compare.

    I've already bought some for MY next project, a TL-1 'Tele'. So will be interesting to see how they go in that

    Also I think Gav has spent long enough in the Naughty Corner, you can't ask him to do more 'time'. Lol

    Thanks again guys

    rob

Page 1 of 4 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •