hi all,
Kicked off our build a week ago and just getting around to starting our build diary...
For my 9 year old son's Winter school holidays I proposed that we start a guitar finishing project of his very own. After perusing the pitbull guitars website for a few minutes, he immediately zeroed in on the Avenge style kit. Ok, so it isn't my cup of tea, but is there any better guitar to spark the interest of a 9 year old boy? I don't think so!
In no time the kit was here, nicely boxed and having survived the journey without dents, marks or machining issues. Great job! Did a quick fit together and everything seems to be OK, although i didn't test alignment of neck, bridge and strings over pickups. Hopefully everything will be alright on the night - it's hard to take too much time with the little guys bouncing off the walls to get started!
We sanded the body from 260 through 360, 400 and 600 grits to 800. After the 400 grit sand we filled the pores with a slurry of Timbermate and re-sanded with 400 until most of the Timbermate was gone.
My son has requested a metallic paint finish with hot rod flames (sorry guys - no Wudtone this time around!), so next step will be to get the primer and paint on to the body and create a mask for the flames..