Oh my!!!!
Oh my!!!!
Gavmeister
nice Gav did you just receive this from Mr Postman ?
what colours you got in mind ?
thats heaps better spalted top than the one I built, and mine had glue spots on the cap ! beware !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
you can solve that problem phloggy by ordering one of each !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yep! Just arrived!Quote from wokkaboy on June 7, 2013, 11:16
nice Gav did you just receive this from Mr Postman ?
what colours you got in mind ?
thats heaps better spalted top than the one I built, and mine had glue spots on the cap ! beware !
Thinking Mahogany for the back and sides, but there isn't any binding to separate the top which I was contemplating Goldenrod or Carmine Gypsy....might just have to do the whole thing in Cherry Flamenco?
nice, thats bizaar, I did mine back sides in mahogany, and did a carmine/golden rod burst on top !Quote from Gavin1393 on June 7, 2013, 11:53
Yep! Just arrived!
Thinking Mahogany for the back and sides, but there isn't any binding to separate the top which I was contemplating Goldenrod or Carmine Gypsy....might just have to do the whole thing in Cherry Flamenco?
cherry all over would look great. You will see the headstock is quite a bit longer and narrower than the standard PRS headstock, but its got heaps of height to play with designs
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I haven't pulled the neck out yet to have a look at the headstock....I'm a little nervous about what I might discover.....after having given special instructions on my order form!
Oh wow, you hit the jackpot with that top Gav!
Yeah! I have to do it justice! Not sure what though!
I'd think something natural to highlight and accentuate the wood - that spalty top is to die for...
Current builds:
GPB-4B: https://www.buildyourownguitar.com.a...548#post184548
Posting Permissions
Reply With Quote