Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 60

Thread: April GOTM

  1. #1
    Hey guys,

    We're about ready to start looking at Guitar of the Month for April. I think we'll have quite a few contenders this time around.

    I've got a special guest judge lined up (to be announced), so, if you want your masterpiece judged, make sure you send us some pics.

    Preferably, you should have a whole guitar shot, plus a close up on the body, a shot of the back of the body and a headstock shot.

    Like this:




    Send your photos to adam@pitbullguitars.com.
    Cheers,

    Adam



    adamboyle(at)pitbullguitars.com

  2. #2
    Forgot to mention, photos to be submitted by midnight Easter Monday.
    Cheers,

    Adam



    adamboyle(at)pitbullguitars.com

  3. #3
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    Glenn will probably enter???? I wanna know who is entering in GOTM May...

  4. #4
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Quote from keloooe on March 28, 2013, 09:05
    Glenn will probably enter???? I wanna know who is entering in GOTM May...
    I'm holding back my '335' for May.......
    http://www.buildyourownguitar.com.au/forum/image.php?type=sigpic&userid=1258&dateline=1443806  448Gavmeister

  5. #5
    Overlord of Music keloooe's Avatar
    Join Date
    Jan 2013
    Location
    Melbourne
    Posts
    3,162
    Quote from Gavin1393 on March 28, 2013, 10:36

    I'm holding back my '335' for May.......
    Lol, bring it mate! :P 8-)

  6. #6
    Yep, I'm entering the Yellow Peril. This is a TL-1 kit with a third-party white pearloid pickguard, and I've added a fidelity circuit across the volume pot. Otherwise it's as supplied. The body is Wudtone Goldenrod with very subtle silver highlights and high gloss top coat. The neck has a single coat of Wudtone Goldenrod base coat everywhere except the fretboard, which I've left natural - then the no-ageing gloss neck topcoat. I've learnt a lot building this, my first ever guitar, and have highly valued the support and advice through this forum. I'm yet to complete setting up the guitar properly, but already the sound is amazing.

    [Edit: oops, posted before adding pics - see below!]

  7. #7
    Yep, I'm entering the Yellow Peril. This is a TL-1 kit with a third-party white pearloid pickguard, and I've added a fidelity circuit across the volume pot. Otherwise it's as supplied. The body is Wudtone Goldenrod with very subtle silver highlights and high gloss top coat. The neck has a single coat of Wudtone Goldenrod base coat everywhere except the fretboard, which I've left natural - then the no-ageing gloss neck topcoat. I've learnt a lot building this, my first ever guitar, and have highly valued the support and advice through this forum. I'm yet to complete setting up the guitar properly, but already the sound is amazing.






  8. #8
    I'm entering the Alson SG-1. I used all stock Pitbull parts for this except for the switch ring and truss rod cover. The finish is Dark Onyx Wudtone with a hot auburn burst, and non aging satin top coat. The writing on the headstock was done with a pyrography pen.
    Like Glenn, this is my first build, and the information on this forum has been invaluable.
    After giving this guitar to my dad as a gift, he had a friend of his who works on guitars professionally, set the neck up for him. He was amazed by the finish and the resulting tone of the guitar. Seriously can not speak more highly of the Wudtone finishing products, they are just freaking amazing



  9. #9
    Good luck Stui, that is an awesome axe with a great back-story. You won't hear any complaints from me if you pull off GOTM!

  10. #10
    Cheers Glenn, likewise, you've made a very sexy axe. Seems like a battle of the newbies with us lol.

Page 1 of 6 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •