Ibanez IB-1 in it first aplication of Hot Auburn.
Ibanez IB-1 in it first aplication of Hot Auburn.
Last edited by Gavin1393; 03-10-2015 at 12:40 AM.
Looks great Gav!!!
Wow Gav. Looks sensational.
Cheers,
Adam
adamboyle(at)pitbullguitars.com
yes Gavin thats looks sensationalQuote from adam on February 25, 2013, 12:10
Wow Gav. Looks sensational.
I'm yet to see a bad wudtone colour !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Unfortunately, all Wudtone colours are awesome!!!Quote from wokkaboy on February 25, 2013, 12:47
yes Gavin thats looks sensationalQuote from adam on February 25, 2013, 12:10
Wow Gav. Looks sensational.
I'm yet to see a bad wudtone colour !
Noice.
Dont forget to colour the jack recess!
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Probably need to put some colour into the bridge recess as well Gav. I remember on the SV-1 you can see quite a bit of wood behind and under the floating bridge.
Cheers,
Adam
adamboyle(at)pitbullguitars.com
OK that answers that question I had about there being a jack plate.....Quote from adam on February 25, 2013, 19:55
Probably need to put some colour into the bridge recess as well Gav. I remember on the SV-1 you can see quite a bit of wood behind and under the floating bridge.
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
No jack plate on this..Quote from dingobass on February 25, 2013, 20:34
OK that answers that question I had about there being a jack plate.....Quote from adam on February 25, 2013, 19:55
Probably need to put some colour into the bridge recess as well Gav. I remember on the SV-1 you can see quite a bit of wood behind and under the floating bridge.. Thought I'd try fitting a Fender Boat Jack but wont fit. Never was an engineering type!!
Thanks for the head-up on the bridge and jack painting....thank goodness for the forum!!!
Gavmeister
Here's an Ibanez, which is similar to the one our IB kit is modelled on, and you can see there's no jack plate and also that the bridge cavity has been painted.
http://cachepe.zzounds.com/media/qua...0744e93134.jpg
Cheers,
Adam
adamboyle(at)pitbullguitars.com
Posting Permissions
Reply With Quote![[url=https://www.facebook.com/kellysgutiars]](image.php?s=a71fcb3d4144a6b488f8e6f0b0786ee5&u=1285&type=sigpic&dateline=1444110346)
