Results 1 to 10 of 71

Thread: Building a BC-1 guitar for my son

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #7
    Moderator Trevor Davies's Avatar
    Join Date
    May 2020
    Location
    Perth
    Posts
    1,729
    There are two parts to these, the insert (or bushing) and the screw-in post. (Other names are the anchor and post!) Unscrew the posts from the bushings, then put the masking tape around the threaded parts of the posts until it is just smaller than the diameter of the bushing.

    The inserts are a very tight fit as friction holds them in place. They will go in after the body has the finish on.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_2026.jpg 
Views:	1445 
Size:	94.0 KB 
ID:	45286  
    Last edited by Trevor Davies; 02-11-2024 at 04:49 PM.
    PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1,TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1, MBM custom, GHR-1 (Resonator), FH-5V (Acoustic).

    Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.

    The little voices in my head keep telling me "build more guitars"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •