Hi All,

I received my ES today and was dry fitting it. Unlike my other builds I plan to glue the neck first before any staining finishing etc. I’ve got a question, I’ve fitted the neck into the pocket and if I press the tenon flush with the base of the neck pocket, there is a gap on the hell and sides where the neck heel meets the body. Likewise if I push the neck so that it is flush with the heel and sides, then there is a gap between the base of the tenon and the base of the neck pocket. It’s rockin . Attached are some pictures. First two are with the tenon pressed flush to the base of the neck pocket & gap at heel, next two pics are the neck heel flush with the body and then showing the gap between tenon and base of pocket. Any advise on best way forward? Thanks in advance…