This is my 2nd go at building a kit guitar.
It's an IB-1F with black hardware.
Photos to follow soon.....
This is my 2nd go at building a kit guitar.
It's an IB-1F with black hardware.
Photos to follow soon.....
Hi Maximalis.
Welcome to the community.
PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1, TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1.
Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.
The little voices in my head keep telling me "build more guitars"
Look forward to the pics
#001 (LP-1S) [finished - co-runner up Nov 2018 GOTM]
#002 (WL-1)
#003 (MPL Megacaster - semi scratch build) [finished]
#004 (ST-1 JR - Arachnoid Superhero build) [finished]
#005 (LP jr)
#006 (TL-1A)
Junk shop acoustic refurbs (various)
'The TGS Special'
Welcome Max.
That kit looks like it holds a lot of potential.
Making the world a better place; one guitar at a time...
Thanks for the welcomes...
Here come some photos
1. Unboxing
2. Checking all the parts are here
3. Dry fitting to check the alignment
Checking for glue on the maple veneer, it looks like there's a spot near the neck PU
some goof-off and a brass wire brush look to be in my future
Well, I thought I'd got all the glue off before I started dyeing.
The plan is to highlight the grain with black dye, then sand that back before colouring.
I'll tape off the neck and cavities etc and let the black sit for a day or so.
I'll spend some more time with the goof-off and wire brush and dye to try and minimize the glue spots
I think I'm happy with the black highlighting now. time to sand it all back (carefully)
half done
all done lightly
finished and ready for the colour