TOM bridge position issue

[Eitan Yerushalmi]

Obviously measuring is vital. You don't want to push things too far the other way!

I'd definitely get hold of either a 600mm or 1m metal ruler first.

And if you are unsure, ask first before doing anything.

Remember that the bridge is angled, so you want to measure the top E nut slot to top E saddle position, which should be set most of the way forward.

I consulted with a pro luthier, and I asked him about moving the neck instead of the bridge (actually I sent him a capture of your messege) and he thinks it could be done, I guess I'll give him to do this, I had enough of this guitar.

I think you're right, it is a custom order and I asked them to check the scale length before they sent me the kit, I was told that it is "spot on" in these words.