It took longer then I had anticipated, but I was finally able to get started on my guitar kit today. I had previously done a mock build to ensure everything was included, so today I worked on doing some initial sanding, and getting the neck to fit into the body. It took a little more work then I had hoped to sand the neck pocket so the neck would fit in, but I am happy with how it fits, and I think it has a good fit. Aside from fitting the neck, I started sanding the body of the guitar, I started with a 180 grit, and after that, I used a 320 grit. I am planning to do some more sanding with higher grit, the next time I do work on the guitar.
Does anyone have any recommendations on how high of grit I should sand with prior to starting the finish?
I have uploaded a picture of the guitar I am planning to model my guitar after, and there are a couple things I was hoping to get some suggestions on.
Does anyone have any advice on what product to use to get the body a solid black with a high gloss?
Is there a product that can give me that vintage yellow finish for the neck and fretboard, and depending on what I use on the neck and fretboard, do most products come off the frets easily afterwards while polishing the frets?
I appreciate any suggestions, or advice anyone has.