Hi all,

I'm fixing this guitar up for a friend and I though it would be easier to recplace all the parts apart from the pickups.
I hope I'm posting this in the correct area because this guitar isn't from Pitbull Guitars however I recently bought some parts from PBG and I'm having a bit of trouble doing the wiring.

The guitar configuration is as follows:
1 x bridge humbucker, 1 x neck humbucker
1 x volume
1 x tone
3 way switch.

Adam said this diagram should be suitable for wiring: https://www.pitbullguitars.com/wp-co..._tele_2014.pdf

However I am unsure how to wire the 3 way switch because it has 8 contact points on the one I bought and the above diagram has 7 on it.

I would appreciate some help on this thank you.

Regards,

Alkay.