And dang, 120 pages! That's an effort and a half, well deserved!!
And dang, 120 pages! That's an effort and a half, well deserved!!
Hey Shazz, check out Fred's building a triple humbucker SG got a custom order. Sounds just like what you want to build
http://www.buildyourownguitar.com.au...ead.php?t=6183
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah I can order a 3pup body, but it's a 3-4month wait haha I want to start now 😜Originally Posted by wokkaboy
Still considering it though so I don't fudge up the body haha
Completed builds: GR-1SF - came up a treat!
Sounds pretty awesome Shazz
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Thanks Andy, it's gunna take me a fair bit longer to complete then the last build... which took a while. But I'm hoping it will be worth it being the perfectionist I am haha
Completed builds: GR-1SF - came up a treat!
Shazz you could probably get DB to route the centre humbucker cavity before it's sent to you. Then you have the flame maple veneer and will be less waiting time !
It's not that hard if you have a decent template, router and pattern following router bit.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
That's an idea! I guess I just need to know the spacing whether it's going to work or if I have to bite the bullet and be patient haha
My FIL is a TAS teacher at a local school so I have access to a whole plathora of tools and things, so it should be doable
Completed builds: GR-1SF - came up a treat!
Hey Shaz I can measure the distance between neck and bridge pup, I have a spare SG-1F body that is unfinished. Pretty sure it will fit but it's tight. The pup rings almost touch each other haha
If I remember I will post tonight on this thread and put 3 pup rings over the body and photograph it
Last edited by wokkaboy; 15-03-2017 at 04:58 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
That would be awesome! Cheers
Completed builds: GR-1SF - came up a treat!
no worries Shazz, or I will just place a pup ring on a finished SG-1F and make sure it fits
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote