FrankeWashie's EXA 1 customised kit

[sansan]

Woww, it looks pretty much heavy build with this neck joint mod and fretboard...i love it!!

[FrankenWashie]

Okay so i've not done a lot just lately mainly due to time constraints, such is working for a living.
The Beta batch of 1/2 strength DT Black Stump turned up about a week ago, i hadn't done anything with it and was going to but then remembered the warnings of a few others that there may be a huge disparity in colour between body and neck as neck was naked white Maple and the body a more earthy toned Ash.

With this in mind, I set about mixing up a series of varying light washes of india ink and water. (From the Bottom, Straight, 75%, 50% and then roughly 25%)

AT this point I began to wonder if it was such a good idea, but i didn't want to end up with the neck and body being completely disparate in colour so I persisted, it ended up being a fairly loose ratio of 1 drop india ink to 2Mls water)

What i have ended up with is a fairly close base grey colour across both the neck& head which more or less matches the timber mated body. Hopefully this gives me enough of a match to let the DT appear even across the whole unit.
.

There are a couple of little glue spot issues to fix but on the whole, reasonably satisfied. At least until I get the DT on it and see what happens next!

[wokkaboy]

looks good Franken, bring the build to the naughty warehouse when you arrive !

[FrankenWashie]

looks good Franken, bring the build to the naughty warehouse when you arrive !

Sweet as bro, I shall need a large amp stack, some remedial guitar lessons, a single plum floating in brandy served in a man's bowler hat and all six of the infinity stones. (I can make it all work with Five of them at a push)

[Andy40]

Hey FW , have you got an off cut of the maple neck to try the black stump on? maybe from when you cut the headstock. I heard one of the plusses about DT is that it takes to the rock maple quite well. I was going to experiment on the off cut of my TL-1A neck as against the ash body but I'm not finished sanding as yet.

[FrankenWashie]

Might have a couple of bits left over.....
Couple of metres is an off cut right?



I had more spare than I thought, i may have to build another guitar to get rid of it.

[stan]

Great progress, nice blending job

[FrankenWashie]

Okey dokey, so because I've been so busy being a smart arse on every other thread, there hasn't been a whole heap of progress on the Explorer project. Also probably because i'm waiting for the DT to cure.
I started the staining with the Black stump, though I juggled the bottles and before i'd thought to check id done the first coat with the intensifier. Ah snot.
SO after a quick consultation with DB, he advised that I could either sand back and start again or continue with out stain for a transparent finish, which is what I'd intended. So thats what I decided to do!
(DB wavered for a moment on my alternate suggestion, which was to douse it with lighter Fluid, Hendrix it, curl up in the fetal position and rock slowly for a while, then find my testicles, tuck tail between legs and order a new kit from Adam, I think he actually wants to see a result!)




There's a couple of odd bits I thought i'd dealt with:
- the Glue line on the back, nope says mr DT.
- the colour difference between maple neck and ash body, but i will hit the neck again to see if this will darken up some more.

So I'm just letting it hang to dry out. The weather in Sydney town is not ideal but so far, so good. When i have left it the 3-4 days between coats, there are no sticky patches and not damp spots it all feels dry to touch, there are a couple of almost "Fuzzy" patches that i am guessing could use some 0000 steel wool attention, but other than that, reasonably happy with the DT. Just gotta let it dry properly and then look for a low humidity day for the first finish coat.

Still tossing up whether to go with a spray acrylic, but I figure i'll probably stay the course with the DT for the experience.

But what to do with myself while waiting out the drying/curing time........

[FrankenWashie]

Well it seems that the humidity gremlins have finally found me! I went for a third coat of the intensifier to even out the colour across neck and body. It all went on well, no great issues but over the past week it has dried patchy and dull in places.
I am picking that this will require a strip back and start again?

[Andy40]

Hey FW,

I didn't think you were after a finish with the intensifier coat? I would probably just take the gloss off with 800 grit toss up whether you need another intensifier and then start the finals. just a suggestion. maybe DB can clarify?

Sorry, I've had the same with stain coats and have lightly sanded the gloss bits with 400 grit before applying the next coat and its worked well.