Results 41 to 44 of 44

Thread: Frost Axe - The 'bargain' SG build

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member cade711's Avatar
    Join Date
    Dec 2016
    Location
    Brisbane, Australia
    Posts
    133

    The 'bargain' SG build

    As discussed with a few forum members yesterday in my JB-4 thread, I made a spontaneous purchase from ebay of a "near new" unfinished SG style kit. I had planning to pick up another PBG bass kit but for a quick $100 this seemed a good buy.
    Just picked it up from the post office this morning to see what I have to work with!

    Solid white poplar body and neck with a rosewood fingerboard. Very lightweight body! It's a 3/4 size I think. No obvious damage to the wood I can initially see from a quick look over. The neck has been glued to the body and whomever I got it from has also pre-drilled guide holes for the hardware and pickguard.

    Click image for larger version. 

Name:	Front and Back unfinished.JPG 
Views:	967 
Size:	23.1 KB 
ID:	16465

    Came with an almost complete assortment of hardware bits and bobs. KD rising sun pickups? Seem to be a wholesale Chinese stock item from what I can find online. Gotoh style chrome tuners which look good and chrome bridge.
    The kit is apparently "ready to build and play" except that it had no strings... so I'll need to choose some which is actually probably a great thing since I can upgrade. The cover plate and pickguard a bit worse for wear but I'll be covering those in custom vinyl anyway.

    Click image for larger version. 

Name:	Hardware front.JPG 
Views:	901 
Size:	22.1 KB 
ID:	16466

    Seeing as I have no strings I couldn't yet do a build to check the alignment on the pre-set neck properly, but it looks pretty locked in place with glue. Some dried up patches to fix around the body and sockets. Also, I haven't checked out an SG before and noticed this high angle of the neck where it joins the body. Looking online it seems to be normal as the bridge will be higher also? If anyone has feedback on that would be great.

    Click image for larger version. 

Name:	Neck angle.JPG 
Views:	894 
Size:	15.8 KB 
ID:	16467Click image for larger version. 

Name:	Neck rear fit.JPG 
Views:	878 
Size:	16.3 KB 
ID:	16468

    Seeing as I'm already building a bass in Flame theme, I decided to try this as Frost / Ice theme to contrast. Some deep blue and lighter teal which hopefully doesn't turn to greenish under top coat.
    Last edited by cade711; 04-02-2017 at 10:30 AM.
    Current build and status
    First build = JB4 (Complete)http://www.buildyourownguitar.com.au...ead.php?t=6692
    Second Build = Non PBG SG (Complete) http://www.buildyourownguitar.com.au...ead.php?t=6827
    Third Build = Impatiently deciding

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •