Phroz STA-1M, ST-M, TL-1

[andrewdosborne]

Appreciated Phrozin. Your axes come up superb and your detailed instruction will help immensely with my current build

[Chuck]

Thanks Phrozin, I'll certainly take your technique tips on board as I've been doing some of the stages a bit differently. The results you are getting speak for themselves. You've also got me interested in compressors/guns as the examples you mention from Supercheap are way cheaper than I thought the whole airbrushing caper would be!

[Andy40]

Thanks for taking the time to post that phroz, I was holding back on painting my next project until i saw it.

[phrozin]

Started my next project have not done much as weather here is to humid to spray have done my normal prep after this one im going to a les paul do a bit of staining and bursts


colour


just a couple of clear coats to wet to spray



btw what program do you guys use to make headstock decal got paper and printer but i dont know how to make a custom decal ?

[wazkelly]

Hi phrozin, for some of my decal logos I used MS Paint and on the latest one I used MS Excel as I wanted to have a reversed out effect and that was easier to do in Excel. Limited by the standard fonts that come with whatever MS Office version you may be running.

Plenty of downloadable fonts but was paranoid about importing a virus and didn't go there.

Hope this helps.

Cheers, Waz

[phrozin]

cheers waz

i found this place online

http://www5.flamingtext.com/All-Logos

did a couple of them but paint doesnt have much to play with in win 10 until i figured out to paste from a file as for a computer wize im a good spray painter lol

[Simon Barden]

That's a useful site. Thanks.

[phrozin]

bit of a update had to repaint it as banged it on my wheelchair put a bit of a dent in it and been a bit busy with doctors and shit pain in the ass


polished used just a straight yellow see if i can put it together with out buggering it up



been playing with microsoft Paint on some headstock decals sort of come up with a few but harder than i thought it was

this


and this


heres some i have sort of done not 100% sure which i finally go with i used the web site i posted and paint windows 10

[Andy40]

Schinie Yellow!

[gavinturner]

That body has come up a treat! Great job. Very interested to see her assembled. What colour pickguard are you going with?

cheers,
Gav.