Muzza's second build. A 'proper' PBG PRS-1Q

[Muzza]

wow I've never seen that type bridge Muzza that doesn't have a bush.
I don't like the idea of drilling the thin thread into the basswood (I presume).

I didn't at first either, but there are lots out there.

How is the height of the bridge adjusted by screwing the round piece below the bridge ?

Yep. I intend to get the neck angle as low as possible, so the bridge is really low. Luckily my Maton has a really low action and I can take measurements from it when I come to set the neck.

The bridge won't have much tension on it but the tailpiece will definitely need a bush drilled into the body to hold the string tension.

This one's going to have through the body ferrules.