EX-1 vs EX-5 - pics that show the differences

[wazkelly]

EX-5 Neck temporarily fitted to assist with where to locate bridge and drill mounting holes.....

[wazkelly]

Bit of a gap underneath end of fret board on the EX-5...

[wazkelly]

EX-5 has been finished for about a month or so and just sitting in the corner letting the neck settle down before a fine tune of the action and intonation.

Progress on the EX-1 has been slow and steady and hope to have it wired up and finished before end of the weekend. Here is a shot of the siblings after most of the hardware was fitted to the EX-1.