looks good Tony the headstock face is quite a bit darker.
Looks like your decking is ready for a coat of paint haha
looks good Tony the headstock face is quite a bit darker.
Looks like your decking is ready for a coat of paint haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
have been using about 75water/25 colour this coat was 50/50
Decking is getting ready for a new decking, was just pricing the timber today, or i could say i like the rustic look
nice one Tony, so did you go to the local bottlo to get the pricing on the decking ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
No i did it from home, but i do have a few of these in the fridge...
nice one Tony, our 330ml Duvel bottles are a much shorter stubbie and shorter neck. Nice beer to have while you shop online !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Mine is 750ml WokOriginally Posted by wokkaboy
Someone asked me the best way to sand inside the bouts on the guitar, it can be a shocker of a job by hand, i use this method, cant claim its mine, but cant remember who showed me.
I get a piece of 32mm PVC cut 2 lengths 250mm one of the lengths i cut all the way down the length a bit shorter than half way.
You get a piece of whatever paper you are using and wrap it around the whole piece then snap the cut piece into place, instant curve sander.
2 bits one cut nearly in half
Clipped together, makes a great sanding tool for curves
Works a treat
Last edited by tonyw; 17-02-2016 at 12:54 PM.
ah got it Tony, the Duvel bottle didn't look big enough for a 750ml, maybe your PC monitor is big ! Our 750mls are the same shape.
nice tip on the curve sanding, which part of the axe are you using this for ?
PS you might want to edit your post to say PVC, not PVV !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I am using it at the moment on a telecaster neck where the headstock joins the neck, just to do a fix for a guy who did a real big oops and made it look like crud.
Inside upper and lower bouts on the 335 to round it nicely.
I have used this trick for ages on just about every sanding job i have
nice tip Tony and you can always use different diameter PVC pipes to suit the sanding job
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yes mate you can but i find this size pretty universal.
Posting Permissions
Reply With Quote