Results 1 to 10 of 642

Thread: My First Build the GR-1SF

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #10
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Shaz have you pulled the wiring out to have a good inspection ? a hum could mean a bad earth to a pot/switch or output jack. Have you run an earth wire from a bridge post and all 4 pots are earthed ?
    can you please post a close photo of the wiring loom may give us some answers

    Also check the 3 lugs on the volume pots aren't making contact with neighboring lugs.
    Last edited by wokkaboy; 15-02-2016 at 06:28 PM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •