cool nice explanation DB, I had no idea how a headless bridge and nut retainer worked.
how much fun was it cutting the headstock off ?
I still need therapy for cutting the neck in half for your clock hahah
cool nice explanation DB, I had no idea how a headless bridge and nut retainer worked.
how much fun was it cutting the headstock off ?
I still need therapy for cutting the neck in half for your clock hahah
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
nice one DB, is that karijini red or uluru red ? I didn't initially notice the carve for the overlord tuning knobs.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
@ Woks. A new colour I am testing. This colour was a custom order, customer was looking for a Rosewood shade and I reckon I pretty well nailed it..
@BassGuy. There should be a few new prototypes requiring your expert critique, o Maestro![]()
OK, I'm keen to see where this goes. Cool idea, Mr DB.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
DB looks great but in the photo looks like a cross between uluru and karijini, needs more brown for rosewood. Maybe it looks browner in the flesh
Also worried the neck in the pic looks wide enough for a 3 stringer haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Good quality Indian Rosewood is more of a red/purple colour.
The Rosewood fretboards on PBG necks are most probabably plantation timber.
Takes a good few years for the tree to mature and colour up so most readily available Rosewood is more of a brown/ red shade.
fair enough DB, I google imaged rosewood colour and got a fair variation in colour.
Should look sweet with the rosewood neck.
Not good looks like Aussies will lose the first ODI against the Kiwis ! (holds head in shame haha)
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in