I've applied the second coat of DingoTone. I'm not impressed with the result of the beta trial colour.
If you compare the LP alongside my TL finished in Lake Placid Blue lacquer, it's not even close. So I've decided to sand it back to a base where I can do a Nitro Lacquer. But I'm having a hard time of it because I cannot sand the DingoTone off. It just clogs the sandpaper. All I've got is Dingo Poo all over it. I've used a razor blade to scrape it down to this.
Has anybody taken off Dingotone to bare wood or can you apply a sanding sealer over it as it is and then apply a lacquer.
I've used a razor blade to scrape it down to this.
Reply With Quote