got the side dot markers up to the 12th fret done. So I've used black markers for 3,5,7,9 etc. White dot markers for others. 12th fret is 4mm MOP. Bit more sanding and should be ready for headstock staining.
Off now to do to 22nd marker. It's a longer scale length 655mm (25.8") so should sound cool
Last edited by wokkaboy; 06-12-2015 at 02:26 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
got a second stain coat on the body and changed to DT butterscotch has darkened the centre oak I bit.
Got the 22 side dot markers finished, bit more sanding.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
got first coat of bushfire on the headstock and the flame is working well. Wayne's JBA-4M headstock to the right has the same treatment
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
You've got some nice rich tone showing there! That headstock is great with that flame!
It'll be interesting to see the late night, beer injected jams recorded on a fretless guitar... I'm waiting for that one!
hahah cheers Swanny, I got no idea how it will play but worst case scenario slide axe
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
so got some more work done, the hardware goodie box arrived mid week so main parts I needed was the string through bridge (Gotoh), ferules and black pup surrounds to try. Here's a mock build with new pots and switch. Had a fail on the switch thought it was jammed but it had rotated and I sheared the lever 70% off, doh, need to order a new one
Last edited by wokkaboy; 12-12-2015 at 10:28 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
got the bridge placed, screwed in and string through holes drilled and ferules test fitted, rushed it a bit and a bit out of alignment.
Got a tele cup output jack and tested black F type knobs and trying out the black pup surround, who prefers cream or black surrounds ?
Found out the neck is sitting a bit proud in the pocket so have to lower a tad, then another coat on body/headstock and bit more cleaning up on the neck, then should be onto clear coats soon
Last edited by wokkaboy; 12-12-2015 at 10:30 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Wokks, thats an interesting jack plate, is that usual for a JM?....by the way this build is looking awesome!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Have you got any spare cream surrounds lying around you can mock up? Throw up a photo of both to see how they compare.Originally Posted by wokkaboy
Bugger on the ferrules... you weren't rushing to finish to have a beer I hope!
IMO the black looks better than the cream as it matches the knobs. Would still go chrome on all of them FTW (knobs too!)
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Posting Permissions
Reply With Quote