Hi Jbird, the veneer was already cut thin, was about 0.8mm thick from memory. I ran the top of the guitar body through DB's thicknesser to get it nice and flat.
How thick is the flamed koa ?
Hi Jbird, the veneer was already cut thin, was about 0.8mm thick from memory. I ran the top of the guitar body through DB's thicknesser to get it nice and flat.
How thick is the flamed koa ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote