So....I masked off the front, and then sanded down the sides to 220 grit. I brushed off the body and wiped it down mineral spirits.
Gonna let it sit till tomorrow and re apply the stain on the sides.
So....I masked off the front, and then sanded down the sides to 220 grit. I brushed off the body and wiped it down mineral spirits.
Gonna let it sit till tomorrow and re apply the stain on the sides.
Hey Lordy, coming along nicely but it's very easy to miss some machine marks on the side so best get them out now and re-stain.
Keep at it and you will be onto clear coats soon.
I've seen some cool workbenches on the forum but cardboard on a washing machine is a first for me hahah
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Got a black & decker workmate but it's got a picture frame in it right now.
no worries Lordy, good that you have a backup plan. I've used a B & D workmate before I had a workbench, great for holding long pieces
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote