Hi Rabbitz, sounds like thick coats will just be too uneven and cause too much sanding later, so as DB always says best apply several thin coats so patience will pay off
Hi Rabbitz, sounds like thick coats will just be too uneven and cause too much sanding later, so as DB always says best apply several thin coats so patience will pay off
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote