Tindrrels IB-6S

[Tindrrel]

The custom bridge for this arrived. Need to do some sorting out of the saddle screws and see what the saddle travel range is before measuring up the bridge position. Don't want to get the through body holes in the wrong place.

Considering putting the neck and bridge on and doing the setup with the strings top mounted first so the risk is lower (just the bridge screws).

Which probably means finishing the neck since I'd rather only out the machine heads on once. So that means time to head to the logo drawing board.

[Gavin1393]

Need to do some sorting out of the saddle screws and see what the saddle travel range is before measuring up the bridge position. Don't want to get the through body holes in the wrong place.

Looks like you have a fair bit of travel range there, remember its only about 3mm between top 'E' and bottom 'E'.