Thanks JarrodWill hopefully have the next instalment sooner rather then later!
Yeah the masking has helped me a lot! I kinda wish I did it on the binding of the body, I will need to scrape/sand before the clear coat :/
Did you end up getting a wax finish? I have done the top coat on the neck and it has come up quite 'shiny' I think that has come down to the grade of sand paper I used (800 was the finest)
Yeah, the neck is smooth and shiny, I think I did 800 grit, too.
I havent done a wax finish.. what is that?
I thought you asked a while back on the forum about a wax? Might not have been you :/
There is a wax that you can get from dingo tone to use after the final coat, just gives it a bit more protection and a different finish its not exactly glossy either.
Here is my newest instalment! Want to say thanks to everyone who has checked out my vids and also subscribedI'm enjoying this project a lot! Thanks also for the tips along the way!
http://youtu.be/tgRPVI9uaEs
So I decided tonight that I wanted to fashion my own Knut out of bone... So I did. I asked friends on FB if they had an old dog bone lying around the yard - some people were quite skeptical of what I was going to do with the bone. I simply said, a project. So tonight I thought of, completed and set my Knut. I am about to put the vid together and post it![]()
It's funny we have 2 dogs but no bones to be found!! They really didn't want to help me at all
Here is the vid![]()
http://youtu.be/pyr_IaTYqh0
Awesome work Shazz, should work a treat.
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/