so I went with the white sap on one side of the covers so it will be on the same side white sap as the fingerboard when upright.
Friday night got the headstock shaped and a veneer glued on for the 4D mascot half neck !
Plan is for 2 volumes and a master tone. Put the switch on the lower horn as Jazzys have them there.
Last edited by wokkaboy; 14-09-2015 at 11:20 AM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote