hey Ponch, I'll probably use 120 grit on the oribital and when the bulk of it's sanded off use a 180 grit orbital on slow speed.
If some of the timbermate falls out I'll try apply more I spose and might have to sand it by hand. Presume when an orbital sander is used it heats up the timbermate and is probably more likely to stick to the paper and come out
Last edited by wokkaboy; 31-08-2015 at 03:19 PM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote