Quote Originally Posted by Arzi View Post
That set plus buying a decent router plus some kind of tilting accessory with them is gonna go over my budget at this point but definately worth considering in the long run.

I read somewhere that some luthiers like to use acetone in stead of glue?
You don't need to buy the router from Stewmac, an appropriate router that runs at 25000 will do. Check out 'Laminate routers" but make sure the col is the same fitting as the router bit you order from stewmac.

Acetone can be purchased from most hardware stores. Great for gluing plastic binding to one another to get the black/white/black or similar combination of binding design. However, it can be very messy working with when attaching to wood if you don't have much experience, hence the glue recommendation. You have to be careful with the Acetone because it does MELT the plastic binding and will indent where you press with your fingers...been there done that!