Results 1 to 10 of 73

Thread: Baritone conversion neck test..

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Quote Originally Posted by wokkaboy View Post
    So Gav is the mahogany body a tele or strat shape? Why don't you have a crack at a scratch body?
    Don't stress I'm there to start a scratch neck for my jazzy
    Its a tele shaped body, but going to have to route the pickups to add the Humbucker and middle single coil. safest to get the body at this stage so that DB knows what he is working to is standard otherwise the neck might not fit the body I produce!

    I'm reminded of a Baritone that hangs on a certain Telenappers wall and the fading words of "if you can pry it from my cold dead hands"....

  2. #2
    Moderator dingobass's Avatar
    Join Date
    Sep 2012
    Location
    Perth
    Posts
    4,491
    Quote Originally Posted by Gavin1393 View Post
    Its a tele shaped body, but going to have to route the pickups to add the Humbucker and middle single coil. safest to get the body at this stage so that DB knows what he is working to is standard otherwise the neck might not fit the body I produce!

    I'm reminded of a Baritone that hangs on a certain Telenappers wall and the fading words of "if you can pry it from my cold dead hands"....
    This one is a test run, Gav.
    I am making yours out of a really tasty chunk of Flamed Rock Maple...

    You will be amazed to know that the Baritone is now back in my possession!

    There is always a workaround for glitches, mistakes and other Guitar building gremlins.....

  3. #3
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Quote Originally Posted by dingobass View Post
    You will be amazed to know that the Baritone is now back in my possession!
    good stuff DB look forward to seeing the barti-tele tomoz

    just tell me, how the hell did you get it back from the tele napper ?

    was there bottles of Jameson Whiskey involved ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  4. #4
    Moderator Gavin1393's Avatar
    Join Date
    Sep 2012
    Location
    Mindarie, Western Australia
    Posts
    3,152
    Quote Originally Posted by dingobass View Post
    This one is a test run, Gav.
    I am making yours out of a really tasty chunk of Flamed Rock Maple...

    You will be amazed to know that the Baritone is now back in my possession!
    Sounds magnificent and will look even better!

    You will have to share your secret on how you managed to secure it again...you sure you didn't just build another one!???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •