yeah would have been delicate work Barge not to punch through the cover. Did you drill the magnet holes before you shaped the cover ?
Would hate to shape it then punch a hole through it
yeah would have been delicate work Barge not to punch through the cover. Did you drill the magnet holes before you shaped the cover ?
Would hate to shape it then punch a hole through it
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Not sure if it was dumb luck but height wise the control plate was pretty close to flush when I cut it so i knew how much room I had to work with as far as the magnet holes went.
nice one bro. Where do you get the special magnets from brah ?
Looks like the BAWS (Barge and Woks Show) is up and running
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
you are only 464 posts from Overlord status brah, the lounge is pretty deluxe !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
BAWS hehehe, coz if you read for too long it BAWS you to death:-)Originally Posted by wokkaboy
Nah those magnets were just ebay specials, $10 for a hundred or something stupid, just punch in "neodymium" and up comes thousands.
Oh yeah, you got Pale Ale??
You know you can't have the Wokka Barge Pest Show without Pest
Great cover plate brah! Also you should seriously get the last few hundred posts in the bag, the Overlord Lounge is choice brah!
any beer you want in the overlord lounge Barge, I haven't been there for a few weeks, Pest will fill you in
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
So I got the back edges all rolled nice today and did and heap of sanding. I'll seal the whole thing, give a final sand then it's time to think about some colour for the top.
Yeah brah, the Overlord Lounge is filled with so much! Cinema, bar, workspaces, anything you could want mate!
Posting Permissions
![[url=https://www.facebook.com/kellysgutiars]](image.php?s=b603fd33664d83ab15cc3429cea6634b&u=1285&type=sigpic&dateline=1444110346)