How thick are the magnets bro ? looks like you recessed them
How thick are the magnets bro ? looks like you recessed them
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah they need to be sunk so the plate sits flat in it's recess.Originally Posted by wokkaboy
3mm maybe, something like that. It was actually a fair bit of work sinking them into the plate. Because you need a flat bottomed hole so as not to bust through the other side as well as keep the magnets seated properly you can only go so far with a pointed drill bit. I then had to square off the bottom of the hole with a little stone grinding bit on the end of the dremmel.
Last edited by bargeloobs; 22-07-2015 at 11:35 PM.
Posting Permissions
