Hi

Nice to see this I.B - issue is something new. Thing is:

Need to ground each bridge - gonna do this by some kind of wiring between bridges. As said I need to close the circuit somehow.

Not gonna wire the tuning pegs. Don't see how I would make this.

Not gonna use a brass nut - still trying to decide using the stock nut or bone nut (have one 42mm x 6mm x 9mm bone nut that just needs a bit of filing to fit).

One of the bridges is located right on top of the wire hole and I'm not too comfortable with the idea of drilling more holes when I've finished the surface. Spent weeks on the TO at that point. Still - some kind of decision has to be made.

2 more days with the oil on the sides, back and neck and then I can finish the top. A week from now I'll finish the sides, back and the neck. Maybe I'll post those pics that I promised ages ago...