nice one Andrew, so the rosewood neck ? I got a JBA maple neck (like Bass Guys) in the pile to build
nice one Andrew, so the rosewood neck ? I got a JBA maple neck (like Bass Guys) in the pile to build
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
What could possibly go wrongOriginally Posted by andrewdosborne
Haha, well good to see some things don't change. 6 pages in and I've only just started sanding. :/
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
haha Pabs you should be used to it by now !
Think Barge's last build diary got to about page 8 before he started sanding so its far from the record !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Plus, that guitar didn't even get finished, so it had the potential to go way longer. I'm not out to set records.Mind you 500 odd views and 50 something posts and I only started this thread a couple of days ago...
Last edited by pablopepper; 25-06-2015 at 12:22 PM.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
yeah thats it Pabs, been a while since you had a build diary so shows everyone is interested in the EX build.
I reckon that basswood has some pretty cool grain. So was this a non PBG kit ?
don't forget the copper shielding before you re-glue the neck bwhahahahha
You are just over 400 posts away from Overlord status too !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I've already got it out. Had to use a chisel. Nah, this is a legit PBG kit (dude was pretty unhappy about it), would have put it in the non-PBG section otherwise. Don't know if it'll be eligible for gotm though, as I was not the first owner. Long way off worrying about that yet.
Last edited by pablopepper; 25-06-2015 at 02:26 PM.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
looks like its the Woks and Pablo show ! last 7 posts ! wonder who the common denominator is hahha
Sure it will be eligible to enter GOTM as its basically a full rebuild.
I have seen some stunning basswood grain but its rare. Sure this will look very nice in red wine and black pickguard.
I'd route out your switch cavity before you start sanding
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Potentially a lot! Hopefully nothing...What could possibly go wrong
Sent from my GT-I9506 using Tapatalk
Current Projects
#Planning 5 String Bass
Andrew you could always pull the old "it was a factory second going cheap" comment hahha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote