Quote Originally Posted by keloooe View Post
So based off the previous discussion about DI, what are you guitar and bass amp setup preferences?

For guitar I'd like to run a pair of Marshall stacks
For bass I'd run two heads, both going to DI and each going to a separate 410 and 115 stack.... Maybe a third stack, why not? :P

I do like DI for bass, I always would prefer to DI off the head instead of DI off the board.... And nope I do not care about what you lot say I have heard a rig similar to what I want in my rig and it sounds quite nice to my ears and is a lot more portable too!
I would recommend if you are going to have different amps for bass, make the stacks the same cabinets. E.g. One stack all 15's, one stack all 10's.

The 1x15 + 4x10 stack is a fallacy. Speaker size tells you only one thing, how big the speaker is. A 15 is not specifically better for low end. In fact the 15 likely has better and far less directional high end while the 4x10 likely has better bass. If you stack them you will put more power into the 15 while the 4x10 loafs - making the 15 cabinet the limiting factor in the stack which you then do not hear over the tens when it is about to blow.

This is all null and void if you have two amplifiers and a proper active crossover. But I would still stack the 15 on top of the 4x10 and feed the 15 with the higher signal.