The bridge does look off, but the two outside strings seem to follow the neck fine.. Could be an optical delusion?
The bridge does look off, but the two outside strings seem to follow the neck fine.. Could be an optical delusion?
Ah good, I was hoping that was the case. Well done.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
wicked colour combo Kaos looking the goods.
I agree with Pablo the bridge did looks off centre. Glad its all good !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah, the grooves in the saddles are on the left side of the barrel, so the bridge is shifted a bit to the right.
I'm fixing the nut to get the action much lower at the first fret, and I have to cut down the pickup mount
springs to lower those a bit too.
sounds good Kaos, sure you will be belting out some good sounds soon !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Got my nut sorted. Action at the first fret is nice and low, around .1 mm when the string is fretted at
the third position. I have some Gibby pickup springs that I'm going to throw under the pups......
Letting the neck settle after stringing it all up..
then I think I may channel a bit of The Ox......The Seeker or Naked Eye...Tommy...
Thank you for being the only person ever to also think of Enty when seeing a ExplorerOriginally Posted by GeneralKaos
John is one of my inspirations!
Been a bit since I posted about this one....
I'm not quite done yet, have to get the headstock logo painted on,
and maybe a bit of pinstriping...
Please excuse the crummy sound quality of the vid, rotten phone!
https://www.facebook.com/1StoneThrow...5687578491886/
Posting Permissions
Reply With Quote