Good advice Woks. On veneer I usually stain, no sanding. Then the sanding back process also sorts out any glue spots, killing two birds with one stone.
Good advice Woks. On veneer I usually stain, no sanding. Then the sanding back process also sorts out any glue spots, killing two birds with one stone.
Current Projects
#Planning 5 String Bass
thats it Andrew, plus my favourite motto is less sanding = win ! hahahOriginally Posted by andrewdosborne
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Does that make you the "Anti-DB" then Wokka?
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
haha something like that Fretty. I don't mind sanding but always a fan of minimising it !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote