When the Australia Post van arrives it feels like Christmas has come early, especially with a first build!
Keen to see an explorer in bondi blue, should be pretty cool!
When the Australia Post van arrives it feels like Christmas has come early, especially with a first build!
Keen to see an explorer in bondi blue, should be pretty cool!
Looks like the Naughty Room might have to be upgraded to the Naughty Warehouse.... Its getting a bit cramped
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Haha yeah DB we need more staff at the naughty bar and pizza kitchen too. Shall we paint the naughty warehouse dark green? Haha
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Two tone. Blue and green stripes, methinks
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
But we will have to use naughty chemicals DB!
DB if we paint it blue and green stripes it can have a big sign MastersBunnings Naughty Warehouse (MBNW)
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
DB if we are to move to a new location can it at least have access to the NBN?
Hey Aiden, I would suggest based on my experience with Tru-Oil that it probably isn't such a good idea. Now DB will be the first to say that TO and DT are miles apart (and they are) but I believe DT does have oils in it, and I think this is the reason my acrylic didnt stick properly when I tried this with TO. It may also be that I didnt leave enough tooth for the acrylic to stick to, so maybe it will be OK.
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
But as DB said to be it should harden up nicely if you give it plenty of time to cure, like 4 days
Posting Permissions
![[url=https://www.facebook.com/kellysgutiars]](image.php?u=1285&type=sigpic&dateline=1444110346)
Reply With Quote
